Benjamin Moore Paint Stores in Brooklyn & the Bronx!
PACOA PAINT THINNER
Stores that Carry this Product
x
Odorless mineral spirits has the same basic properties as paint thinner. It is a petroleum distillate with an evaporation rate similar to turpentine (relatively slow), and is an excellent general purpose solvent. It is used for thinning oil based paints, cleaning brushes and tools, and degreasing metal parts. It can be used to remove wax from floors (but do not use on rubber or asphalt tiles). It is relatively inexpensive, and a little goes a long way. The flash point is higher than 40°C, which makes it one of the safer specialty solvents. The difference between Odorless Paint Thinner and Low Odor Paint Thinner is in the content of aromatics. Low Odor Paint Thinner contains approximately 6% aromatics, while Odorless Paint Thinner contains less than .05%. This makes it more pleasant to work with and allows the solvent to exceed Clean Air requirements.
G-FORCE 34-534PAEXP-PRO1-K ODORLESS KEROSENE
KLEAN STRIP KS-QML170 LACQUER THINNER 17015
Linseed oil boiled”klean-strip” size=quart Made with 100-percent pure linseed oil. Dries faster than raw linseed oil. Improves the flow and gloss of oil-based paint. A classic finish for natural wood to seal and protect it.
klean-strip qvm46 VM & P naphtha, 1 Qt metal can, transparent ?, Liquid
Klean Strip 100% pure gum spirits turpentine is a great, natural thinner preferred by artists to thin or remove art paints.
For Pro™s and DIY™ers, Klean-Strip is the leading brand of solvents, thinners, removers, and cleaners that are dependable for reliable results. Klean-Strip Acetone is a strong, fast-acting solvent that is a thinner and remover for specified coatings, including polyester and epoxy resins, ink, adhesives and contact cement. Acetone is an effective cleanup solvent after the completion of a fiberglass project, for removal of excess fiberglass resin or foreign material from solvent-tolerant surfaces. Read entire label prior to use or storage. Keep out of reach of children.
Sometimes you want to extend drying times to create a hard, protective and glossy finish. That’s when Klean-Strip xylene can be used in place of toluene to thin specified oil-based paint, lacquer, varnish, epoxy, adhesives and synthetic enamels. Xylene will also remove certain adhesives and is an excellent solvent for cleaning up spills, as well as tools and equipment immediately after use.
Krud Kutter 32 oz. Brush Wash and Renewer is a biodegradable, water-based formula that allows safe, fast and effective removal of coatings from applicators. Formulated to work with a variety of products including oil paint, latex paint, varnish, lacquer, shellac and polyurethane. Specially formulated to clean and renew synthetic brushes, rollers and other paint applicators. Not for use on natural bristle brushes.
This item is a XIM 11071 Latex X-Tender Flow and Leveling Additive, 1-Gallon. Purpose of use for Painting Supplies, household-paint-solvents. This product is manufactured in United States.
The Flood Floetrol Latex Paint Additive helps make painting more convenient while helping you achieve a professional result. This useful paint additive fortifies paint, helps eliminate brush marks, reduces tip clogging and can make latex paint spray more like oil paint. The floetrol is suitable for interior and exterior use and conveniently cleans with soap and water.
PENETROL® Oil-Based Coating Additive is a versatile low-odor additive to improve penetration, adhesion and flow of oil-based paints, stains, varnishes and primers.
Use what professionals use to speed up drying when they need to apply several coats on the same a day Klean Strip Japan drier. Its special blend of lead-free drying agents accelerates the drying ability of oil-based paint, oil-based enamels, varnish and polyurethane. It is especially effective in highly humid or cool weather conditions. Though Klean Strip Japan drier appears purple, it will not affect the color of your coating.
A traditional, high quality Dutch “white spirit”. We strongly recommend this solvent as the only thinner/cleaning solution for use with our solventborne coatings. This is the same solvent which is used in the production of our oil finishes and it contains a substantially different formula than conventional mineral spirits. FPE Mineral Spirits dissolve solids rather than diluting them and go three times further than conventional solvents.